Mig Welders come complete with original Binzel Torch with 4 metre lead, Heavy Duty Earth Lead and Clamp, Electrode holder, Gas Hose, hose clamps, instruction manual and are Generator Safe.
Mini Mig - NEW for 2018
Mini Digital Mig-Arc-Tig 200amp Gas-Gasless Welder
Comes with accessories, Binzel Torch, Arc Lead, Earth Lead, Spares
New 3D style front panel
Smart design with full digital control
Easy changeover from Gas to Gasless
Accommodates 1kg/5kg/200mm wire rolls.
Generator Safe 7.7kva
Magnum Digital Mini Mig200/Arc/Lift
Tig 200amp Gas & Gasless Welder $800
great little lightweight Mig welder, ideal for farmers, the home, workshop
or trades people and is especially suited for car restoration and panel beating
where fine Mig & Tig welding is required on panel steel.
Being the latest super small 4in1
Multifunction Mig, Tig, Arc welder with gas and gasless capabilities it is so
convenient at only 8kg. Super small, super lightweight, super-efficient welder
adopts STM32 series MCU and UC3846 control, switch frequency 50Hz more
stability and reliability. It runs gassed or gasless wire in Mig mode and
is capable of Arc and DC Lift Tig welding. Easy to start and runs a very smooth
uniform weld with very little spatter.
It will weld from 0.8mm to 10mm mild
steel plate with ease and is generator safe (7.7kva).
design with full digital control
digital waveform control technology, synergic adjustment and voltage can be
3D style front panel
in polarity conversion
voltage input: 160 270V 1PH
1kg/5kg/200mm wire rolls
power consumption for energy saving
Mini Mig200 Mig/Tig/Arc gas/gasless welder
15 series Mig torch 3m
lead and clamp 3m
0.8-1.0mm ‘V’ wire roller
0.8-0.9mm Knurled Roller for Gasless wire fitted
Torch Gasless Ceramic Nozzles (3)
Tips (2) Hose Clamps (2) Spanner
input power voltage (v/hz) Ac220 +-15% 50/60
input power capacity Mig 200amp
7.7kva, Arc/Tig 160amp 6.8kva
output current 200amp
output voltage 24v
Output current range Duty Cycle
30-200amps 40%@200Amps, 100%@130Amps
30-160amps 40%@160Amps, 100%@100Amps
30-160amps 40%@160Amps, 100%@100Amps
voltage range 11-26v
class of case ip21s
of coil 200mm
of wire 0.6, 0.8, 0.9mm
welder dimension 442x182x345mm
Regulator Angle Adapter $40
Tig torch – Series 26 $90
Thoriated Tungsten Tips Pkt 10 $40
Mig200 4in1 Gas Gasless Welders
Mig-Arc-DC Tig, Gas and Gasless wire
25amps - 200amps Great for panel steel
Magnum Welders Mig200
Lightweight at 18kg and Generator safe 6kva
Takes a 200mm wire roll
Easy change over from gas to gasless wire
Magnum Mig200 Mig Arc DC Tig 200amp Gas-Gasless Welder $900
Model # M200
welder is a Professional 200Amp IGBT inverter Mig/Arc welder which is
generator safe. This unit is made for Magnum Welders
and is comparable in performance and quality to any European welder. It
is the latest 4in1 Multifunction Mig, Tig and Arc Welder with gassed and
gasless Mig welding.
This fantastic machine runs gassed or
gasless wire in Mig mode and is capable of Arc and Scratch Tig welding.
- Mig mode welds mild steel,
aluminium and stainless steel.
- Arc welds mild steel, stainless
steel and cast iron.
- Tig welds mild steel, stainless
steel, titanium, copper and chrome moly.
farmers, the home handyman, tradesmen and is especially suited for car
restoration work and panel beating where fine Mig & Tig welding is required
on panel steel.
Turbo fan cooled
Binzel gun with 4 metre lead
Heavy duty earth lead and clamp
Accommodates 5kg/200mm wire rolls
Gassed and gasless wire
Burn back control
- Heavy duty wire feed with manual adjustment control
18kgs lightweight and portable
- Generator safe 6kva
Duty cycle in Mig mode 60% @ 200amps and
100% @ 155amps
This machine will weld from 0.8mm to 12mm mild steel plate. It will also weld Aluminium &
Stainless Steel in Mig mode. Has no problems welding heavy or light gauge steel. Easy to
start and runs a very smooth uniform weld with very little spatter.
What you Get:
Magnum Mig/Tig/Arc 200amp gas/gasless
Binzel 15 series Mig torch with 4m
Earth lead and clamp
0.8 - 1.0mm ‘V’ wire roller fitted
0.6 - 0.8mm 'V' wire roller
0.9 - 1.2mm 'U' wire roller for Aluminium
0.9 - 1.2mm Knurled wire roller for gasless wire
Extras Available: Regulator $70 Tig Torch $90 Teflon Liner $30 Thoriated Tungstens pkt 10 $40
Magnum Welders Mig250 Mig-Arc-DC Tig Welder 250amps
Heavy Duty, tough and hard working
Generator Safe 8.5kva
Huge Duty Cycle
Will weld 0.8mm - 16mm mild steel plate
Mig250 Mig-Arc-Tig Welder
Holds a 15kg wire roll portable and easy on wheels
Magnum Mig250 Mig Arc DC Lift Tig 250amp Welder $1,200
Model # M250
The Magnum Mig/Tig/Arc250 is a Professional 250Amp IGBT
inverter MIG welder which is generator safe. This unit is made for Magnum
Welders and is comparable in performance and quality to any European welder. It
is the latest in multifunction Mig, Tig and Arc Welders.
FULLY INSTALLED GASLESS WIRE CONVERSION IS AVAILABLE AS
AN OPTIONAL EXTRA $100
(includes FREE Knurled wire roller 0.9-1.2mm valued at $40)
This welder has 250amps maximum output. A huge duty cycle of
60% @ 250amps & 100% @ 194amps this machine will weld from 0.8mm to 16mm
mild steel plate and above with ease. It is a universal Mig/Tig/Arc welder
ideal for all general purpose welding.
- Mig mode welds mild steel, aluminium and stainless steel.
Arc welds mild steel, stainless steel and cast iron.
- Tig welds mild steel, stainless steel, titanium, copper & chrome
Other features include:
High quality Binzel gun with 4 metre lead
- Heavy duty earth lead and clamp
- Accommodates 15kg/300mm or 5kg/200mm wire rolls
- Gassed wire only (unless gasless conversion option is selected)
- Heavy duty geared wire feed rollers
- Only weighs 25kgs
- Digital Amp & Voltage readout
- Burnback control
- 2T/4T torch latching control
This welder is a serious heavy duty Mig/Arc250 with a huge
duty cycle. High quality components are used throughout. Strong metal
constructed casing with rolled corners for added strength and a sturdy lifting
handle. This welder is lightweight and extremely portable, suitable for on site
work. Generator safe (8.4kva) In most cases this welder is the same weight as a
copper coil remote wire feed unit alone. IGTB inverter technology. Current-type
control quality is reliable. Closed circuit feedback constant voltage output.
Suitable for wide voltage range (+ - 15%).
Welding performance is stable, little spatter, deep welding
pool, welding bead is excellent. Easy Arc starting. Suitable for work piece
thickness of which is more than 0.8mm.
What you get:
Magnum Mig/Arc250 Mig welder
Binzel 24 series Mig torch with 4m lead
Heavy duty earth lead and clamp
‘V’ wire roller 0.8-1.0mm fitted
Tig Torch $90
Teflon Liner $30
0.9 - 1.2mm 'V' wire roller $40
0.9 - 1.2mm 'U' wire roller for Aluminium $40
Thoriated Tungstens pkt 10 $40
* Gasless Conversion for Mig Arc Tig 250 $100.00
gasless conversion it has to have an extra outlet installed
in the front of the welder and re-route the wires to reverse
the polarities. With this modification you can either do gassed or
gasless welding just by swapping the plugs over. This modification must
be done before leaving the warehouse. Any modifications performed by
anyone other than Magnum Welders will void warranty.
Includes knurled roller (valued $40)