Mig200/Arc/Lift Tig 200amp Gas & Gasless Welder - Digital

  • Brand: Magnum Welders
  • Product Code: MIG200 MINI
  • Availability: Out Of Stock
  • $850.00

File Size
Flier Mini Digital Mig-Arc200 gasless.pdf 253.98KB Download

Magnum Welders Pty Ltd are the Professionals in Welders and Plasma Cutters.

We specialise ONLY in welders and plasma cutters and source the most reliable and best quality available.


Magnum Digital Mini Mig200/Arc/Lift Tig 200amp Gas & Gasless Welder only 8kg


A great little lightweight Mig welder, ideal for farmers, the home, workshop or trades people and is especially suited for car restoration and panel beating where fine Mig & Tig welding is required on panel steel.

Being the latest super small 4in1 Multifunction Mig, Tig, Arc welder with gas and gasless capabilities it is so convenient at only 8kg. Super small, super lightweight, super-efficient welder adopts STM32 series MCU and UC3846 control, switch frequency 50Hz more stability and reliability. It runs gassed or gasless wire in Mig mode and is capable of Arc and DC Lift Tig welding. Easy to start and runs a very smooth uniform weld with very little spatter.

It will weld from 0.8mm to 10mm mild steel plate with ease and is generator safe (7.7kva).

Features include:

  • Smart design with full digital control
  • Fully digital waveform control technology, synergic adjustment and voltage can be fine tuned.
  • New 3D style front panel
  • Constant voltage control
  • Built in polarity conversion
  • Wide voltage input: 160 270V 1PH
  • Overheating protection
  • Accommodates 1kg/5kg/200mm wire rolls
  • Low power consumption for energy saving
  • 2T/4T Torch Latching
  • VRD Switchable
  • Turbo fan cooled

What you get:

  • Digital Mini Mig200 Mig/Tig/Arc gas/gasless welder
  • Binzel 15 series Mig torch 3m
  • Electrode holder 3m
  • Earth lead and clamp 3m
  • Gas hose 3m
  • 0.8-1.0mm ‘V’ wire roller
  • 0.8-0.9mm Knurled Roller for Gasless wire fitted
  • Mig Torch Gasless Ceramic Nozzles (3)
  • Mig Tips (2) Hose Clamps (2) Spanner
  • Instruction manual


Frequency input power voltage (v/hz) Ac220 +-15% 50/60

Rate input power capacity         Mig 200amp 7.7kva, Arc/Tig 160amp 6.8kva

Input current                          15amp

Rated output current                200amp

Rated output voltage                24v

Output current range             Duty Cycle     

Mig 30-200amps                      40%@200Amps, 100%@130Amps

Arc 30-160amps                      40%@160Amps, 100%@100Amps

Tig 30-160amps                       40%@160Amps, 100%@100Amps

Output voltage range                11-26v

Power factor                            0.85

Insulation class                        F

Protection class of case             ip21s                                             

Diameter of coil                       200mm                                               

Diameter of wire                      0.6, 0.8, 0.9mm                                                    

Weight                                   8kg                                                          

Overall welder dimension          442x182x345mm                                    



Regulator                                 $70

Regulator Angle Adapter             $40

Tig torch – Series 26                  $100

Thoriated Tungsten Tips Pkt 10    $40

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Mig250/Arc/DC Lift Tig 250amp Welder

Mig250/Arc/DC Lift Tig 250amp Welder

Magnum Welders Pty Ltd are the Professionals in Welders and Plasma Cutters. We specialise ONLY in..