Mig200Arc/DC Tig 200amp Gas & Gasless Welder

Magnum Welders Pty Ltd are the Professionals in Welders and Plasma Cutters.

We specialise ONLY in welders and plasma cutters and source the most reliable and best quality available.

Magnum Welders Mig200/Arc/DC Tig 200amp Gas & Gasless Welder

Ideal the home workshop or trades people and is especially suited for car restoration and panel beating where fine Mig & Tig welding is required on panel steel.

This Professional 200Amp IGBT inverter Mig/Arc/Tig welder is comparable in performance and quality to any European welder. Being the latest 4in1 Multifunction Mig, Tig, Arc welder with gas and gasless capabilities it is lightweight, portable and generator safe. It runs gassed or gasless wire in Mig mode and is capable of Arc and Scratch Tig welding. It will weld from 0.8mm to 12mm mild steel plate and above with ease. It will also weld Aluminium & Stainless Steel in Mig mode. Has no problems welding heavy or light gauge steel. Easy to start and runs a very smooth uniform weld with very little spatter.

Features include:

• Low amps for panel steel
• Turbo fan cooled
• Accommodates 5kg/200mm wire rolls
• Heavy duty wire feed with manual adjustment control
• Mig mode welds mild steel, aluminium and stainless steel
• Arc welds mild steel, stainless steel and cast iron
• Tig welds mild steel, stainless steel, titanium, copper and chrome moly

What you get:

• Magnum Mig200 - Mig/Tig/Arc gas/gasless welder
• Binzel 15 series Mig torch with 4m lead
• Electrode holder
• Earth lead and clamp
• Gas hose
• 0.8 – 1.0mm ‘V’ wire roller fitted
• 0.6-0.8mm 'V' Roller
• 0.9-1.2mm 'U' Roller for Aluminium
• 0.9-1.2mm Knurled Roller for Gasless wire
• Instruction manual

Specifications:

Frequency input power voltage (v/hz) Ac220 +-15% 50/60

Rate input power capacity                  6kva

Input current                                    15amp

Rated output current                         200amp

Rated output voltage                         24v

Output current range                        Mig 25-200amps

                                                      Arc 10-160amps

                                                      Tig 25-160amps

Duty cycle                                       60%@200Amps, 100%@154Amps

Output voltage range                       11-26v

Power factor                                    0.85

Insulation class                                F

Protection class of case                     ip21s

Feeding speed (metres/min)             1.5-14                                                      

Diameter of coil                               200mm                                               

Diameter of wire                              0.6, 0.8, 0.9, 1.2mm                                             

Weight                                            18kg                                                        

Overall welder dimension                 480x230x360mm                                    

Extras:

Regulator                                        $70

Teflon Liner                                     $30

Regulator Angle Adapter                   $40

Tig torch – Series 17                        $90

Thoriated Tungsten Tips Pkt 10         $40